80% AFUE Gas Furnace 1600 (4 Ton) CFM Single-Stage

58SP0A070V17--16
$0.00 / EACH
58TP_1_highest-res.jpg
  • : Carrier
  • : Trading Goods (ZAW1)
  • : 03 - Use
  • : Each
  • : Pound(LB)
  • : Standard Item (NORM)
  • Auto Enrichment Status: Ready
  • BTU Input (btu): 66000
  • Configuration: Upflow;Downflow;Horizontal
  • Equipment Type: Gas Furnace
  • Stage: 1.0
  • Blower Motor Fan Speeds: Variable - Speed
  • Btu Input: 66,000 (5.5 Tons)
  • Cfm Cooling: 1720
  • Configuration: Upflow
  • Frequency: 60
  • Ignition Type: Silicon Nitride Hot Surface
  • Media Filter Cabinet Inclued: False
  • Nox Emissions: Standard
  • Primary Heat Exchanger Type: Aluminized Steel Clamshell
  • Blower Motor Hp: 3/4
  • Btu Output: 54,000 (4.5 Tons)
  • Cfm Heating: ATCO RUBBER PRODUCTS INC
  • Communicating: False
  • Gas Connection Size: 1/2
  • Maximum Circuit Breaker: 15
  • Number Of Burners: 3"
  • Blower Motor Nominal Rpm: 1200 (3 Ton)
  • Fuel Type: Natural Gas, Convertible to Propane
  • Maximum Unit Amps: 10.8
  • Tonnage: 4"
  • Blower Motor Type: Variable-Speed, Constant Torque ECM
  • Heat Efficiency (Afue): 80%
  • Max Inlet Pressure: 13.6
  • Maximum Voltage: 127
  • Blower Wheel Diameter: 11
  • Maximum Wire Length: 25'
  • Min Inlet Pressure: 4.5
  • Blower Wheel Width: 8
  • Minimum Voltage: 104
  • Drive Type: Direct Drive
  • Indoor Fan Motor Fla: 9.6
  • Minimum Wire Size: 1/4
  • Stages Of Heat: Single - Stage
  • Phase: Single
  • Unit Ampacity: 14.3
Overview

Performance series furnaces offer that perfect balance between budget limits you may have today and your desire for a better comfort heating solution.

As an 80% furnace this model is most suitable for areas with milder winters. You can pair it with a high-efficiency heat pump or air conditioner and gain a cooling efficiency boost from its variable-speed blower.

Features

STANDARD FEATURES

  • 80.0% AFUE heating efficiency
  • Single-stage operation
  • Variable-speed, constant torque ECM blower motor for great comfort
  • Fully insulated cabinet
  • Low NOx models available (58SP1)
  • 10-year parts limited warranty upon timely registration1
  • 20-year heat exchanger limited warranty2

OPTIONAL FEATURES

  • Optional labor warranty available3


1 To the original owner, when product is used in an owner-occupied residence, a 10-year parts limited warranty upon timely registration of your new equipment. Warranty period is 5 years if not registered within 90 days. Jurisdictions where warranty benefits cannot be conditioned on registration will automatically receive a 10-year parts limited warranty. See warranty certificate for complete details.

2 To the original owner, when product is used in an owner-occupied residence, a 20-year heat exchanger parts limited warranty upon timely registration of your new equipment. See warranty certificate for details.

3 Ask your Carrier® dealer for details.

Specifications

EFFICIENCY

  • 80.0% AFUE

PERFORMANCE

  • Hybrid Heat® compatible
  • Year-round humidity management when installed as part of complete Performance system with humidifier
  • Can help boost cooling SEER efficiency when matched with appropriate cooling system components

TECHNOLOGY

  • Single-stage gas valve
  • Variable-speed, constant torque ECM blower motor
  • Pilot-free, hot surface PowerHeat™ ignition
  • Fixed-speed inducer motor
  • Aluminized steel clamshell-style primary heat exchanger
  • Sound reduction: fully insulated cabinet and QuieTech™ noise reduction
  • Recommended controls: Performance™ Edge® relative humidity or ComfortZone™ II thermostats

CAPACITIES

  • 30,000-110,000 Btu/h

INSTALLATION

  • Flexible installation: upflow, downflow or horizontal
  • Versatile venting for tight-fit applications

REQUIREMENTS

  • 115 V
  • .5" gas connection
  • Convertible to Liquid Propane (LP)

AESTHETICS

  • 20-gauge, galvanized steel with appliance finish
  • Baked on urethane base coat and polyester top coat paint in taupe metallic
  • Dimensions in upflow position: 33.25"H x width varies by size: 14.25-24.5" x 29"D

FOR CALIFORNIA RESIDENTS

  • For installation in SCAQMD only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com.
QTY
Add to List